Use the following procedure to configure a single node Avaya Breeze® platform cluster.
Note:
For every Avaya Breeze® platform server running Avaya Device Adapter Snap-in, an additional SIP Entity of the Endpoint Concentrator type must be defined. A number of Entity links between the SIP Entity and one or more Avaya Aura® Session Managers must also be defined. The Entity links must have a Connection Policy set to Endpoint Concentrator. An Avaya Aura® Session Manager Communication Profile must also be defined for every user or endpoint.
On System Manager, click ElementsAvaya Breeze®Cluster Administration.
Click New.
Select the Cluster Editor page.
Select the Core Platform cluster profile.
Enter the cluster attributes.
ADDITIONAL INFORMATION:
Note:
The cluster name must be unique.
Important:
Do not assign a Cluster IP address to a single node cluster.
Select Enable Cluster Database.
ADDITIONAL INFORMATION:
Note:
Device Adapter cannot be installed if the cluster database is disabled.
Select Should calls be allowed on the cluster.
Select values for the Minimum TLS Version for Non-SIP Traffic and Minimum TLS Version for SIP Call Traffic.
Deselect Use secure signaling for platform initiated SIP calls to allow unsecured calls.
Enter the SIP domain in the Default SIP Domain field.
Select the Servers tab.
Assign servers to the cluster.
ADDITIONAL INFORMATION:
Note:
All servers in a cluster must have the same Avaya Breeze® platform version.
Select the Services tab.
Assign the Device Adapter service.
Click Commit.
STEP RESULT:
The Service Install Status field on the Cluster Administration page displays a green tick symbol after all the assigned snap-ins are successfully installed on all the servers in the cluster.
Next steps
Click Show to display the cluster details. Click the Service Install Status field of each server to see the detail of services.
