Making an outgoing call using Private Line Service feature

Last Updated : Feb 10, 2020 |
Prolog information
Metadata
Keywords:
If some of the PSTN trunks are assigned as private trunks to your endpoint, the Private Line Service feature allows a CS 1000 or a Meridian 1 proprietary endpoint to access these reserved PSTN trunks to make outgoing calls.
Before you begin
Ensure that:
  • You have required configurations related to the CO trunk and trunk groups to make an outgoing call using the private trunks.
  • You have the Hotline button configured on your endpoint with the TAC code programmed as the auto dial number.
  • Hotline button is labelled as PVR or PVN on your endpoint.
  1. Press the PVR button to make an outgoing call.
    ADDITIONAL INFORMATION:
    The PVR button will access the reserved trunk for the endpoint.
  2. Dial the number using the dial pad.
    ADDITIONAL INFORMATION:
    If the called party is available and answers the call, an active call is established between you and the called party.
  3. Press the Release button or place the handset on hook to end an active call.
    ADDITIONAL INFORMATION:
    Either you or the caller can end an active call.