This topic provides information about administering a digital or UNIStim station with hotline lists.
Define or modify an abbreviated dial list with the desired destination as an entry.
Create the X-Port with the call appearance required for the hotline.
Define the FAC codes for any Abbreviated Dialing List required. This could include List 1, List 2, and List 3. If only List 1 is used in stations, then the FAC for List 1 suffices, but any list that is used must have the FAC defined.
Edit or create the station with the “Hotline” button. Do the following:
Define a bridged appearance button for the hotline. Device Adapter provides a localized label “Hotline” for the button.
Specify required abbreviated list number in CM station’s Abbreviated Dialing List 1, List 2 or List 3 fields.
Add the HTL (Hotline) L (list) mnemonic:
ADDITIONAL INFORMATION:
HTLxxMkLyEzzz
where:
ADDITIONAL INFORMATION:
xx is the key number (starting with the lowest button numbered as 1) HTL08 would indicate key 7 (the eight button on the phone or expansion module).
k is the button module number. K may be 0 if the button is on the station itself, or Mk may be omitted for the station itself. For indicating the modules, k is the button module number 1-3, depending on the station and module type.
