Use the following procedure to configure additional SIP Entity and Entity Links for every Avaya Breeze® platform servers running Avaya Device Adapter Snap-in.
The SIP Entity administered in a previous step will be referred to as the Breeze SIP Entity. The new entity created in this procedure will be referred to as the Device Adapter SIP Entity.
Log on to System Manager by using the appropriate credentials.
Select ElementsRoutingSIP Entities from the menu.
Verify that the corresponding Breeze SIP Entity is configured with TLS enabled. Note the port values used for the "SIP Entity 1" (presumably SM) and the "SIP Entity 2" (presumably the Breeze SIP Entity) in the associated Entity Links.
Click New.
Enter the name of the new entity.
Enter the servers Security Module IP address in the FQDN or IP Address field.
ADDITIONAL INFORMATION:
Important:
This is the same IP address used to configure the corresponding Breeze SIP Entity.
Select Endpoint Concentrator in the Type field.
Create an Entity Link for every relevant Session Manager.
Select the Session Manager in the SIP Entity 1 field.
Select TLS Protocol.
Enter the Session Manager Port (SIP Entity 1 Port)
ADDITIONAL INFORMATION:
Important:
The Session Manager Port used in Entity Links of the Device Adapter SIP Entity must be different than the Session Manager Port used in corresponding Entity Links of the corresponding Breeze SIP Entity.
Select the Device Adapter SIP Entity being administered in the SIP Entity 2 field.
Enter the Device Adapter SIP Entity Port (SIP Entity 2 Port).
ADDITIONAL INFORMATION:
Important:
The SIP Entity 2 Port used in Entity Links of the Device Adapter SIP Entity must be the same as the SIP Entity 2 Port used in corresponding Entity Links of the corresponding Breeze SIP Entity.
