Creating a VDN extension for Attendant Vectoring

Last Updated : Oct 30, 2012 |

About this task

Use the Vector Directory Number screen to define vector directory numbers (VDNs) for the Call Vectoring feature. A VDN is an extension that gives you access to a call vector. Each VDN is mapped to one call vector.

VDNs are not assigned to physical equipment. You gain access to a VDN through direct dial central office (CO) trunks that are mapped to the VDN, direct inward dial (DID) trunks, and listed directory number (LDN) calls. The VDN can be a night destination for LDN.

Procedure

  1. Type change vdn n, where n is the VDN extension. Press Enter.

    The system displays the Vector Directory Number screen.

  2. In the Attendant Vectoring field, perform one of the following actions:

    • If you want this VDN to be an attendant vector, type y.

    • If you do not want this VDN to be an attendant vector, type n.

      You cannot use Attendant Vectoring with the Meet-me Conference feature. Therefore, the Attendant Vectoring field and the Meet-Me Conferencing field cannot both be set to y at the same time.

  3. Press Enter to save your changes.