SIP trunks do not need any special configuration for Communication Manager to send the Malicious Call Trace notification
Use Steps 1 to 5 for ISDN-PRI connections and Steps 6 to 10 for ISDN-BRI trunk connections, as appropriate for your network. Communication Manager does not send MCT notification over ISDN/H.323 trunks.
Procedure
In the Communication Manager CLI, enter add ds1 n, where n is the number of the DS1 media module that you want to add.
In the Country Protocol field, do one of the following:
If the DS1 is connected to a public network in Australia, type 2.
If the DS1 is connected to a public network that supports the ETSI Malicious Call Trace Identification (MCID) service according to EN 300 130, type etsi.
If the DS1 is connected to a private network of servers that run Communication Manager, type 1.
In the Peer Protocol field, type q-sig, if the DS1 is connected to a private network of servers that run Communication Manager.
The system displays the Peer Protocol field when the:
Signaling Mode field is set to isdn-pri.
Connect field is set to pbx.
Interface field is set to either peer-master or peer-slave.
To administer other fields on the DS1 Media Module screen, see Administering Avaya Aura®Communication Manager.
Press Enter to save your changes.
Enter change bri-trunk-board.
In the Cntry/Peer Protocol field, type one of the following: * 2 if the ISDN-BRI media module is connected to a public network in Australia.
* etsi if the ISDN-BRI media module is connected to a public network that supports the ETSI Malicious Call Trace Identification (MCID) service according to EN 300 130.
In the Interface field, type either peer-master or peer-slave, if the ISDN-BRI media module is connected to a private network of servers that run Communication Manager.
To administer other fields on the ISDN-BRI Trunk Media Module screen, see Administering Avaya Aura®Communication Manager.
Press Enter to save your changes.
Note:
You must set the Supplementary Service Protocol field on the ISDN Trunk Group screen to a for Australia and c for ETSI.
