Cluster Session Manager |
Allows you to administer up to 10 clusters of Session Manager. Cluster Number is a read-only field. |
Cluster Number Cluster Name Session Manager node names |
Signaling Group |
Allows you to administer a Cluster ID if the Clustered field is set to y. Administration of a Session Manager cluster on a Signaling Group form allows the signaling group to point to all Session Managers in the cluster. The Peer Server and Enable Layer 3 Test fields are read-only if the Clustered field is set to y. If the Clustered field is set to n, you can edit the Peer Server and Enable Layer 3 Test fields. |
Clustered Cluster ID Peer Server Enable Layer 3 Test |
Station |
Displays the primary, secondary, third, and fourth Session Managers to which the SIP Trunk Optimization feature sends the Invite to the station. Primary, secondary, third, and fourth Session Manager fields are read-only on the SAT interface. They are populated by System Manager during SIP station administration or translation synchronization between System Manager and Communication Manager in case of already administered SIP stations. IP addresses are allocated to these fields only when the policy-based assignment is enabled in System Manager. |
Primary Session Manager Secondary Session Manager Third Session Manager Fourth Session Manager |
Trunk Group |
Allows you to configure the number of trunk members that can be administered on a SIP trunk group. |
Number of Members |
Route Pattern |
Displays the network region for each of the route preference on the route patterns. |
Network Region |
IP Options System Parameters |
If the signaling group is clustered, you see the following options:
|
Node-Name of Primary SM BW Mgr Node-Name of Secondary SM BW Mgr |
