Assigning a telephone to a partition group

Last Updated : Oct 30, 2012 |

About this task

Assigning a telephone extension to a partition group is a two-step process. First, assign the partition group to a COR. Then assign that COR to the extension.

Procedure

  1. Enter list cor.
  2. Choose a COR that is not used.

    In this example, use COR number 3.

  3. After you review this information, press Enter to exit the screen.
  4. Enter change cor x, where x is the COR number that you just chose.

    In this example, the COR number is 3.

  5. In the COR Description field, type a name for this COR.

    In this example, the COR name is lobby, named for the telephone in the lobby.

  6. In the Partitioned Group Number field, type the number of the partition group.

    In this example, the partition group number is 2.

  7. Select Enter to save your changes.
  8. Enter change station n, where n is the extension.
  9. In the COR field, type the number of the COR.

    In this example, the COR number is 3.

  10. Select Enter to save your changes.