Setting up ANI on a multifrequency trunk

Last Updated : Nov 10, 2020 |

About this task

Using an ANI request button on the telephone, the user can display the telephone number of the calling party during the voice state of the call. The trunk must support this functionality.

Procedure

  1. Type change multifrequency-signaling n, where n is a number between 1 and 8. Press Enter.

    The system displays the Multifrequency-Signaling-Related Parameters screen.

    Note:

    The number of pages and the fields on the screen that the system displays is based on the value in the Outgoing Call Type field.

    • If the value in the Outgoing Call Type field is group-ii-mfc, the system displays four pages. The system also displays the ANI Prefix, Default ANI, Next ANI Digit Incoming, and Next ANI Digit Outgoing fields.

    • If the value in the Outgoing Call Type field is mfe, the system displays two pages. The system also displays the ANI Prefix, and Default ANI fields.

    • If the value in the Outgoing Call Type field is none, the system displays three pages. The system also displays the Next ANI Digit Incoming field.

      For a thorough description of the Multifrequency-Signaling-Related Parameters screen and the values for the fields see the Administering Avaya Aura® Communication Manager.

  2. When you are finished, press Enter to save your changes.