Assigning Precedence Calling system parameters

Last Updated : Oct 04, 2016 |

Procedure

  1. Enter change system-parameters mlpp.
  2. In the Precedence Calling-Dialed Digit Assignment fields, make any necessary changes.
    Caution:

    Avaya recommends that you do not change the default Precedence Calling dialed digits unless you are coordinating this change with other companion networks in your system. If the Precedence Calling digits do not match across networks, the system does not properly process the calls. Each of the Precedence Calling digits must be different. You cannot use the same digit for two different precedence levels.

    • Flash Override. 0 to 9 or blank (the default is 0)

    • Flash. 0 to 9 or blank (the default is 1)

    • Immediate. 0 to 9 or blank (the default is 2)

    • Priority. 0 to 9 or blank (the default is 3)

    • Routine. 0 to 9 or blank (the default is 4)

    • Attendant Diversion Timing. 10 to 99 seconds or blank (the default is blank)

    • Remote Attendant Route String. 1 to 24 numeric digits or blank (the default is blank). When you administer this string, use address digits only. Do not use FACs. For more information, see Precedence Calling diversion scenarios.

    • Precedence Call Timeout. 10 to 60 seconds (the default is 30)

    • Default Service Domain. 0 to 16777215. This number defines the system service domain, and must be unique within a switching network. The system uses the system service domain to determine eligibility for precedence calling when interswitch precedence calls over non-ISDN trunks occur.

  3. Press Enter to save your changes.
Related information
Precendence Calling diversion