Creating the SBS trunk group

Last Updated : Oct 04, 2016 |

Procedure

  1. Enter add trunk-group n, where n is the number of the trunk group.
  2. Click Next until you see the Trunk Parameters section.
  3. Set the Group Type field to ISDN.
  4. Set the Carrier Medium field to H.323.
  5. Set the Dial Access field to n.
  6. The Supplementary Service Protocol is always set to b.
  7. Click Next until you see the Trunk Features section.
  8. Set the SBS field to y (default is n).
    Note:

    The SBS field can only be set to y if all the following are true:

    • Carrier Medium field is set to H.323,

    • Dial Access field is set n,

    • Supplementary Services Protocol field is set to b, and

    • Local Country Code and International Access Code fields are administered on the Features Related System Parameters screen. The Send Name, Send Calling Number and Send Connected Number fields must be set to y for the SBS trunk group to enable these capabilities on SBS calls.

  9. Set the NCA-TSC Trunk Member field to one member of the SBS trunk group.
  10. Set the Send Name field to y.
  11. Set the Send Calling Number to y.
  12. Set the Send Connected Number to y.
  13. Select Enter to save your changes.