Assigning the sources of music for the tenant partitions

Last Updated : Oct 08, 2020 |

Procedure

  1. Enter change music-sources.

    The Source field is a display-only field.

    • Note that if the Tenant Partitioning field on the Optional Features screen is set to y:

    The Feature-Related System Parameters screen does not display the Music/Tone on Hold field.

    The first Source field on the Music Sources screen displays the value in the Music/Tone on Hold field on the Feature-Related System Parameters screen.

    If the value in the Music/Tone on Hold field on the Feature-Related System Parameters screen contained music, the Music Sources screen also displays the port address.

    • Note that if the Tenant Partitioning field on the Optional Features screen is set to n:

    The Music/Tone on Hold field reappears on the Feature-Related System Parameters screen.

    The system displays the value from the Music Sources screen, in the Music/Tone on Hold field on the Feature-Related System Parameters screen.

  2. In the Type field, perform one of the following actions:

    • If you want the users to hear music, type music.

    • If you want the users to hear the tone-on-hold tone, type tone.

      You can specify tone for only one music source.

    • If you want the users to hear nothing, type tone.

  3. In the Port field, type the auxiliary trunk address or the analog port address of the music source.

    You cannot enter duplicate addresses in the Port field.

    The system displays the Port field only if you typed music in the Type field.

  4. In the Description field, type a maximum of 20 characters that describe the source of the music.

    The system displays the Description field, only if you typed music or tone in the Type field.

  5. Select Enter to save your changes.