Merging an ISDN-BRI telephone with TTI

Last Updated : Oct 30, 2012 |

Procedure

  1. Connect the telephone to any port to get power.
  2. Program the service profile identifier (SPID) to the extension with which the telephone is to be merged.
  3. Unplug the telephone.

    You must unplug the telephone, even if the telephone is connected to the intended port.

  4. Connect the telephone to the intended port.

    The intended port must indicate Equipment Type: TTI Port.

  5. Listen for the dial tone.

    • If you hear dial tone, the merge is complete.

    • If you do not hear dial tone, the SPID of the telephone is an unavailable extension.

    You can dial the TTI merge sequence for BRI telephones only if a user separates a BRI extension from its telephone, and then wants to reassociate the telephone to the same extension. You cannot use the system access terminal (SAT) to put an x in the Port field of a BRI Station record that is still connected to the server that runs Communication Manager. You must use the TTI separation sequence from the telephone.