Administering the ARS Digit Analysis Table for UDP

Last Updated : Oct 30, 2012 |

Procedure

  1. Enter change ars analysis n,where n is the number of the ARS Analysis Table.

    The location field is a display-only field.

    • If the ARS field and the Multiple Locations field on the Optional Features screen are set to y, the location field is set to a number between 1 and 250. The numbers 1 through 64 in the location field define the location of the server that uses this ARS Digit Analysis Table.

    • If the ARS field on the Optional Features screen is set to y, but the Multiple Locations field on the Optional Features screen is set to n, the location field is set to all. A value of all in the location field indicates that this ARS Digit Analysis Table is the default for all port network locations.

  2. In the Dialed String column, type the numbers that the system compares to the number that the user dials.

    You can also type *, a lower case x, or an upper case X as wildcard characters.

    The system uses the dialed string that most closely matches the number that the user dials. For example, if a user dials 297-1234, and the AAR Digit Analysis Table contains two dialed strings of 297-1 and 297-123, the system uses the dialed string 297-123 as the match.

    When the system compares a user-dialed number with an entry in the Dialed String column that is an exact match and an entry in the Dialed String column with one or more wildcard characters, the system chooses the exact match. For example, if a user dials 424, and the AAR Digit Analysis Table contains two dialed strings of 424 and X24, the system uses the dialed string 424 as the match.

  3. In the Min column, type the minimum number of user-dialed digits that the system uses to compare with the matching pattern in the Matching Pattern column.
  4. In the Max column, type the maximum number of user-dialed digits that the system uses to compare with the matching pattern in the Matching Pattern column.
  5. In the Route Pattern column, type the route information that you want the server to use for the dialed string.

    Perform one of the following actions:

    • To specify the route index number that you established on the Partition Routing Table screen, type a value from p1 to p2000.

    • To specify the route pattern that the system uses to route the call, type a number from 1 to 640.

    • To specify the route pattern that the system uses to route the call, type a number from 1 to 999. Use this number range only for the S8XXX Server.

    • If RHNPA translations are required for the corresponding dialed string, type a value from r1 to r32 to specify the remote home numbering plan.

    • To designate node number routing, type node.

    • To block the call, type deny.

  6. In the Call Type column, type the call type that is associated with each dialed string.

    The call types indicate the numbering requirements on different trunk networks. Perform one of the following actions:

    • To alert attendant consoles or other digital telephones when a user places an emergency call, type alrt.

      This call type is a normal China number 1 call type.

    • To designate an emergency call, type emer.

      This call type is a normal China number 1 call type.

    • To designate a 10-digit North American Numbering Plan (NANP) call, type fnpa. NANP calls consist of 11 digits and a prefix digit of 1.

      This call type is an attendant China number 1 call type.

    • To designate a 7-digit NANP call, type hnpa.

      This call type is a normal China number 1 call type.

    • To designate a public network international number, type intl.

      This call type is a toll-auto China number 1 call type.

    • To designate an international operator, type lop.

      This call type is an attendant China number 1 call type.

    • To designate a non-NANP call, type natl.

      This call type is a normal China number 1 call type.

    • To designate a national private call, type npvt.

      This call type is a normal China number 1 call type.

    • To designate a national service call, type nsvc.

      This call type is a normal China number 1 call type.

    • To designate an operator call, type op.

      This call type is an attendant China number 1 call type.

    • To designate a public network number (E.164) unknown call, type pubu.

      This call type is a normal China number 1 call type.

    • To designate a national(2) call, type svcl.

      This call type is a toll-auto China number 1 call type.

    • To designate a national(2) call, type svct.

      This call type is a normal China number 1 call type.

    • To designate a service call, first part control, type svft.

      This call type is a local China number 1.

    • To designate a service call, first part control, type svfl.

      This call type is a toll China number 1 call type.

  7. In the Node Number column, type the number of the destination node in a private network if you use node number routing or DCS.
  8. Use the ANI Req column only if the Request Incoming ANI (non-AAR/ARS) field is set to n on the Mutifrequency-Signaling-Related System Parameters screen.

    If the Request Incoming ANI (non-AAR/ARS) field is set to n on the Mutifrequency-Signaling-Related System Parameters screen, perform one of the following actions in the ANI Req field:

    • If you require ANI on incoming R2-MFC or Russian MF ANI calls, type y.

    • If you do not require ANI on incoming R2-MFC or Russian MF ANI calls, type n.

    • If the Allow ANI Restriction on AAR/ARS field is set to y on the Feature-Related System Parameters screen, type r. When you set the ANI Req field to r, the system drops a call on a Russian shuttle trunk or a Russian rotary trunk if the ANI request fails. For calls on other types of trunks, the system processes an r entry in the ANI Req field as a y.

      The Percent Full column displays the percent of the allocated system memory that is used by AAR and ARS. You cannot change this field.

  9. Select Enter to save your changes.