Enabling IPv6 addressing

Last Updated : Jan 18, 2017 |

About this task

The following procedure describes the settings to enable IPv6 addressing in Communication Manager.

Procedure

  1. On the Communication Manager SMI page, navigate to Server Configuration > Network Configuration.
  2. In the IPv6 is Currently enable field, select enabled.
  3. Click Change.

    With this change, the system displays the IPv6 text boxes against each field.

  4. Enter the IPv6 values for the default gateway, IP address, and prefix.
  5. Click Change.
  6. For the changes in the IPv6 settings to take effect, you must restart Communication Manager:
    1. In the Server section, click Shutdown Server.
    2. Ensure that the Restart server after shutdown field is selected and click Shutdown.