Configuring your system for Enterprise Mobility User

Last Updated : Oct 03, 2016 |

Procedure

  1. Type display cos to view your Class of Service settings.

    The system displays the Class of Service screen.

  2. Verify that the Personal Station Access (PSA) field is set to y.

    The PSA field applies to the primary telephone and must be set to yes for EMU.

  3. Type display feature-access-codes.

    The system displays the Feature Access Codes screen.

  4. Page down till you see the fields for Enterprise Mobility User Activation and Deactivation.
  5. The feature-access-codes (FAC) for both EMU activation and EMU deactivation must be set on all servers using EMU.

    You must enter the FAC of the server in the location where you are dialing from.

    Note:

    To avoid confusion, Avaya recommends that all the servers in the network have the same EMU feature-access-codes.

  6. Administer the EMU timer on the system-parameters features screen.

    The EMU timer applies to the visited server only. You can administer the timer for each server in the system. The amount of time a visitor can remain registered during a period of inactivity is entered in the EMU Inactivity Interval for Deactivation (hours) field. From one to 24 hours may be entered. If the entry is left blank, the EMU timer is not used and the visited station remains registered until it becomes unregistered by other means.

  7. Administer the Emergency Extension Forwarding timer on the system-parameters features screen.

    The amount of time that must elapse before a visitor can log in as EMU after making emergency calls from an EMU-activated station is entered in the Emergency Extension Forwarding (min) field. The default value is 10 minutes.